Originating from barns dating back to the mid 1700’s on the East Coast, reclaimed Oak barnwood flooring is available in a range of widths. We can mill the reclaimed barn wood flooring as a solid wood flooring or engineered wood flooring. With the exception of surfaced oak, all barn oak flooring products are supplied as mixed widths and a minimum setup fee will be applied to jobs less than 500 square feet. Selecting exclusively White Oak is an option in surfaced barn oak flooring as well.
Painstakingly selected for ultra-flat, straight, and as free of stains as possible, our reclaimed rustic barnwood flooring is sold as a stunning mix of width, colors and textures. Each board is sent through a special sander which lightly sands the surface while leaving the patina and character marks. This reclaimed barn board product is available in 3-6″ random width and in lengths to 10′. Depending on current inventory, wider planks may be available. Because of the varied surface of the raw material, this flooring is highly recommended to be milled as an engineered product to maximize flat surfaces. Herringbone and other patterns are available upon request for an additional cost.
This reclaimed wood floor product is similar to our “Rustic Barn Oak” flooring with the difference being the amount of sanding we have done to it. Each plank is passed through our sander to smooth out the boards further without removing all of the original character. Depending on the level of character desired, this can be installed and sanded a little further on site. This product is available typically as mixed width (generally 3″-8″). Uniform width available on rare circumstances when inventory permits. Herringbone and other patterns are available upon request for an additional cost.
This reclaimed wood flooring product uses our reclaimed barn oak planks. Each board is carefully selected before being passed through a planer to remove all the patina and mill marks. The smooth surface retains the character of small seasoning checks or cracks, nail holes and other marks showing it age. This product can also be provided with a bandsaw texture, or wire brushed. This product is available in a specified width or as mixed width (generally 3″-8″) and is available both solid or engineered. This is a popular option for a more refined appearance and can be stained on site. Herringbone and other patterns available upon request for an additional cost. Please specify if you would like square edges or eased edges (shown) when placing your order.
This product is produced using an extraordinarily wide and long batch of white oak. We can manufacture this reclaimed wood flooring in mixed widths or a specified width to a maximum of 14″. The surface appearance is available either smooth, bandsawn, or wire brushed and will contain a few character marks such as old nail holes and seasoning checks. This resulting floor is mixed grain, dense, original growth white oak. Available engineered only. Please specify if you would like square edges or eased edges (shown) when placing your order.