In Stock Hand Hewn Douglas Fir Mantels

These mantels are currently in stock and ready to install. Please let us know if you need additional information on any particular piece. Sold with the back edge cut flat for installation, and detail sanded on all exposed sides, these unfinished mantels can be installed as they are or a clear or tinted wax can be applied after installation. Wax sold separately for $20 per pint.

The front edge is shown in the photo with the sizes listed by thickness x depth x length. Additional milling is not available on these at this time.

#1 SOLD

#2  9″ x 11.25″ x 66″ = $655

#3  SOLD

#4  5.25″ x 10″ x 60″ = $595

#5  5″ x 11″ x 66″ = $595

#6 SOLD

#7  SOLD

#8 5″ x 7.5″ x 60″ = $595

#9  3″ x 7″ x 72″ = $450

In Stock Sanded Douglas Fir Mantels

These mantels are currently in stock and ready to install. Please let us know if you need additional information on any particular piece. Sold with the back edge cut flat for installation, and detail sanded on all exposed sides, these unfinished mantels can be installed as they are or a clear or tinted wax can be applied after installation. Wax sold separately for $20 per pint.

The front edge is shown in the photo with the sizes listed by thickness x depth x length. Additional milling is not available on these at this time.

#10  3.75″ x 7″ x 60″ = $450

#11  4″ x 7.5″ x 72″ = $450

#12  SOLD

#13  4″ x 7.25″ x 84″ =$450

#14  4″ x 7.25″ x 60″ = $450

#15  SOLD

#16  4″ x 7.25″ x 72″ = $450

#17  4″ x 7.25″ x 84″ = $450

#18  4″ x 7.5″ x 60″ = $450

#19  5.25″ x 9″ x 60″ = $595

#20  2.75″ x 8.75″ x 72″ = $265

#21  3.5″ x 7.75″ x 60″ = $450

#22  3.5″ x 7.5″ x 84″ = $450

In Stock Hardwood Barn Beam Mantels

These mantels are currently in stock and ready to install. Please let us know if you need additional information on any particular piece. Sold with the back edge cut flat for installation, and detail sanded on all exposed sides, these unfinished mantels can be installed as they are or a clear or tinted wax can be applied after installation. Wax sold separately for $20 per pint.

The front edge is shown in the photo with the sizes listed by thickness x depth x length. Additional milling is not available on these at this time.

#25  9.5″ x 10″ x 72.5″ = $795

#26  8.25″ x 7.75″ x 68.25″ = $715 – HOLD

#27  SOLD

#28  4.75″ x 7″ x 63.5″ = $585

#29  SOLD

#30  5.5″ x 6.5″ x 60″ = $635

#31  5″ x 6.25″ x 62″ = $635

#32  SOLD

#33  5.5″ x 6″ x 60″ = $635

#34  5″ x 6″ x 84″ = SOLD

#35  5″ x 9″ x 66.5″ = $635

In Stock Hardwood Live Edge Barn Beam Mantels

These mantels are currently in stock and ready to install. Please let us know if you need additional information on any particular piece. Sold with the back edge cut flat for installation, and detail sanded on all exposed sides, these unfinished mantels can be installed as they are or a clear or tinted wax can be applied after installation. Wax sold separately for $20 per pint.

The front edge is shown in the photo with the sizes listed by thickness x depth x length. Additional milling is not available on these at this time.

#36  4.25″ x 9.5″ x 53″ = $585

#37  4″ x 8″ x 58″ = $585

#38  SOLD

#39  SOLD

In Stock Surfaced Redwood Mantels

These mantels are currently in stock and ready to install. Please let us know if you need additional information on any particular piece. Sold with the back edge cut flat for installation, and detail sanded on all exposed sides, these unfinished mantels can be installed as they are or a clear or tinted wax can be applied after installation. Wax sold separately for $20 per pint.

The front edge is shown in the photo with the sizes listed by thickness x depth x length. Additional milling is not available on these at this time.

#40  6.75″ x 9.75″ x 64.75″ = $635

#41  6.5″ x 8.75″ x 59.75″ = $635

#42  6″ x 9.5″ x 65″ = $635

#43  6″ x 8″ x 65″ = $635

#44  2.75″ x 8″ x 71″ = $320

In Stock Sanded Redwood Mantels

These mantels are currently in stock and ready to install. Please let us know if you need additional information on any particular piece. Sold with the back edge cut flat for installation, and detail sanded on all exposed sides, these unfinished mantels can be installed as they are or a clear or tinted wax can be applied after installation. Wax sold separately for $20 per pint.

The front edge is shown in the photo with the sizes listed by thickness x depth x length. Additional milling is not available on these at this time.

#45  4″ x 11.5″ x 64″ = $585

#46  4″ x 9.25″ x 54″ = $585

#47  3.5″ x 7.5″ x 57.75″ = $585

#48  4″ x 10.5″ x 72″ = SOLD

#49  3″ x 9.25″ x 72″ = $320

#50  3.5″ x 7.25″ x 60″ = $585

In Stock Live Edge Redwood Mantels

These mantels are currently in stock and ready to install. Please let us know if you need additional information on any particular piece. Sold with the back edge cut flat for installation, and detail sanded on all exposed sides, these unfinished mantels can be installed as they are or a clear or tinted wax can be applied after installation. Wax sold separately for $20 per pint.

The front edge is shown in the photo with the sizes listed by thickness x depth x length. Additional milling is not available on these at this time.

#51  SOLD

#52  3.5″ x 12″ x 57.5″ = $585

#53  4″ x 9.5″ x 72″ = $585

#54  3.5″ x 11.5″ x 64″ = $585

#55  3.5″ x 7.5″ x 84″ = $585

#56  2.5″ x 10.5″ x 47″ = $320

In Stock Hand Hewn Redwood Mantels

These mantels are currently in stock and ready to install. Please let us know if you need additional information on any particular piece. Sold with the back edge cut flat for installation, and detail sanded on all exposed sides, these unfinished mantels can be installed as they are or a clear or tinted wax can be applied after installation. Wax sold separately for $20 per pint.

The front edge is shown in the photo with the sizes listed by thickness x depth x length. Additional milling is not available on these at this time.

#57  3″ x 10″ x 65.75″ = $320

#58  2.5″ x 12″ x 71″ = $320

Antique Chamfered Oak Posts

These oak posts were salvaged from Rice’s Mill in Tennessee built in 1775 and are spectacular!

Antique Water Wheel Hubs

These water wheel hubs were used in Rice’s Mill, built in 1775. The creek and water wheel served as the “motor” that made the mill function and grind grain into flour for the town for generations. These cast iron hubs have some incredible patina and calcium buildup on the outside due to decades of use and would make incredible table tops. If the wood spokes we replaced, a table top could be built at almost any diameter with a great section in the middle where you could plant succulents. They would also make a great piece of yard art just like they are. With a bit of elbow grease, they could be put back on their original shaft and used again! 

Sold individually or as a pair.

Antique Grist Mill Swing Arm

This amazing swing arm is built from oak and originates from the Rice’s Mill in Tennessee built in 1775. It would make an amazing sign display or great piece of yard art.

Antique Grist Mill Flour Dresser

We have three of these antique flour dressers sourced from Rice’s Mill in Tennessee built in 1775. With a bit of work, they could make some great display cases. These were originally used to separate different grades of flour out depending on how fine or course it was ground.

Antique Hay Grapple Hooks

This beautiful set of antique grapple hooks would make an awesome statement in any farmhouse!

There are two sets of these available.

$250 each

Antique Hay Grapple Hooks

This nice set of antique hay grapple hooks would make a great statement in a farmhouse.

$200

Antique Hay Harpoon

Great decor piece for any farmhouse, mancave, or barn.

$125

Antique Solid Teak Dugout Canoe

This incredible canoe was carved from a solid teak log. It would make a stunning light fixture or hang it like we have it displayed in our showroom with plants. A truly great and unique piece to fit any coastal decor!

Vintage Timberwear

T shirts and flex fit hats are available for $15 each. Hats are available in black only (S/M) and (L/XL). Shirts are brown, charcoal, blue, and light gray. Shirts run pretty small – please order one size larger than you typically wear for all colors except light gray.

Vintage Timberwear

Jackets – $45

These button up jackets are great for working outdoors. Warm, soft and durable. Limited amounts still available in brown, tan, and olive.

Reclaimed French Oak Cutting Boards – $125

These beautiful cutting boards are made with french white oak tasting sticks inserted into industrial-sized stainless steel tanks during the fermentation process of wine making. The sticks were used to enhance the flavor of the wine and give it a prized woody taste. This great look is also available in custom sizes – great for butcher block counters and table tops.

Available in two colors – Light/Dark

Measurements are 15″ x 20″ x 1.5″

Antique Strap Hinges – Set of 2 – $85

This set of 2 strap hinges is sold with traces of white paint on one and blue paint on the other. They measure approximately 28″ and 30″long. The shorter of the two is a little bent but should be able to be pounded flat. Salvaged from an east Coast barn dating back to the 1800’s, theses would make a great decorative addition to a barn door or coffee table.

Antique Malleable Washers – $5 each

These antique malleable washers have been salvaged from large industrial buildings. They work great for accents when bolting mantels to the wall or when exposed bolts and washers add to the rustic appearance on posts and beams. They are typically used with a 5/8″ or 3/4″ bolt. Volume discounts apply.

Ancient Kauri Solid Guitar Blanks

One piece Telecaster – $200

One piece Stratocaster – $325

These incredible pieces have been brought in from New Zealand after being dug up from underground peat bogs and carbon dated at over 50,000 years old!

Fully workable material that will truly shine after sanded down with a coat of finish applied. Great for guitar blanks, cutting boards, or other small crafts.

Book Matched Stratocaster Guitar Tops

$275 Each

These rare sets have been brought in from New Zealand after being dug up from underground peat bogs and carbon dated at 50,000 years old!

Fully workable material that will truly shine after being sanded down with a coat of finish applied.

Old Growth Redwood Stratocaster Blank

Stratocaster Blank $100

These are blanks are left over from a limited production we did with Fender guitars. This reclaimed old growth redwood guitar blank has extremely tight vertical grain on the face.

Old Growth Redwood Telecaster Blank

Telecaster Blank $100

These are blanks are left over from a limited production we did with Fender guitars. This reclaimed old growth redwood guitar blank has small pin knots included in its tight vertical grain face.

Antique Indonesian Doors

These unusually tall carved doors from Indonesia would make incredible interior doors, sliding barn doors, shutters, cabinet doors, table and desk tops and more!

Each door measures about 25″ Wide x 93″ Tall x 1 1/4″ Thick

Sold as a pair with original hinges

Please call for pricing and additional pictures.

Antique Indonesian Doors

These antique doors from Indonesia would make incredible shutters, cabinet doors, table and desk tops and more!

Each door measures about 26 1/2″ Wide x 73″ Tall x 1 1/4″ Thick

Sold as a pair

Please call for pricing and additional pictures.

Antique Indonesian Door

This antique door from Indonesia would make an incredible sliding barn door, shutter, cabinet door, table or desk top and more!

Door measures about 19 1/2″ Wide x 76 1/2″” Tall x 1 1/4″ Thick

Please call for pricing and additional pictures.

Antique Balinese Fishing Boat

Check out this incredible antique fishing boat. An amazing piece!